| Intercommunication
Control Units |
 |
 |
|
|
C6533A
(A301-1A) Intercommunication System Control
Designed to be the basic control unit for a two or three
position intercommunication system of advance design. Contains microphone and headset amplifiers and the necessary
switching facilities to provide for intercommunication (with
or without a hot mike) and modulation, monitoring and control
of up to 5 transceivers.
Read
more (.pdf) ››› |
|
|
|
 |
A301-1
(C6533/ARC) Intercommunication System Control
Designed to be the basic control unit for a two or three
position intercommunication system of advance design. The A301-1
contains microphone and headset amplifiers and the necessary
switching facilities to provide for intercommunication (with
or without a hot mike) and modulation, monitoring and control
of up to 5 transceivers.
Read
more (.pdf) ››› |
|
|
|
|
|
A201-12
Intercommunication System Control
Designed to be the basic control unit for a two or three
position Intercommunication System of advanced design. In addition
to intercommunications and radio monitoring facilities, the
control provides for selection, control, and modulation of radio
transmitter for communications with airborne, ground, or mobile
station. FAA TSO-C50b approved.
Read more
(.pdf) ››› |
|
|
|
|
|
A301-12-1
Communication Control Unit
Designed to be the basic control unit for a multi-position,
up to 12 stations intercommunications system. The A301-12-1
is an advances Intercommunication Control System designed to
meet current and future requirements of Military Communications.
Read
more (.pdf) ››› |
|
|
|
|
|
A301-412
Intercommunication Control Unit
The A301-412 is our newest audio control unit. It is FAA TSO-C50c approved, and qualified to RTCA DO-160D, including
the latest EMC / Lightning multi-stroke and multi-burst requirements.
Read
more (.pdf) ››› |
|
|
|
|
|
A301-6
Intercommunication System Control
Designed to be the basic control unit for a multi-position
(up to 12) intercommunication system of advanced design. In
addition the A301-6 was designed to accommodate all the various
communication and warning signal components normally employed
in commercial aircraft. FAA TSO-C50b approved.
Read more
(.pdf) ››› |
|
|
|
|
|
A301-61
Intercommunication System Control
Designed to be the basic control unit for a multi-position
(up to 12) intercommunication system of advanced design. It
is a high reliability unit employing solid-state relay circuits
and modular microphone, headset, and speaker amplifiers. It
will provide specified performance from a 5 ohm Dynamic Microphone
or a 100 ohm carbon microphone and an 8 ohm or 600 ohm headset. FAA TSO-C50b approved.
Read
more (.pdf) ››› |
|
|
|
|
|
A301-61A
Intercommunication System Control
Designed to be the basic control unit for a multi-position
(up to 12) intercommunication system of advanced design. It
is a high reliability unit employing solid-state relay circuits
and modular microphone, headset, and speaker amplifiers. It
will provide specified performance from a 5 ohm Dynamic Microphone
or a 100 ohm carbon microphone and an 8 ohm or 600 ohm headset. FAA TSO-C50b approved.
Read
more (.pdf) ››› |
|
|
|
|
|
A301-61B-1
Intercommunication System Control
Designed to be the basic control unit for a multi-position
(up to 12) intercommunication system of advanced design. The
A301-61B-1 incorporates auxiliary talk and listen switches to
permit emergency operation in the event of a malfunction of
either the headset or microphone amplifiers. FAA TSO-C50b approved.
Read
more (.pdf) ››› |
|
|
|
|
|
A81-3 (C2104/AIC-18)
Intercommunication Set Control
A panel-mounted assembly designed to provide high intelligibility
intercommunication and radio monitoring facilities for airborne
and ground installations. The Set Control also provides for
selection, control, and modulation of radio transmitters for
communications with airborne, ground, or mobile stations.
Read
more (.pdf) ››› |
|
|
|
|
A301-14A Interior Voice Communication Unit
A bulkhead mounted intercommunication station utilizing the same high performance amplifiers as the Model A301-12-1. It was designed for and is being used in the U.S. Navy Air Cushion Landing Craft.
Read more (.pdf) ››› |
|
|
|
